Understanding the costs of investigating coliform and E. coli detections during routine drinking water quality monitoring

Bacteriological failure investigations are crucial in the provision of safe, clean drinking water as part of a process of quality assurance and continual improvement. However, the financial implications of investigating coliform and Escherichia coli failures during routine water quality monitoring are poorly understood in the industry. The investigations for 737 coliform and E. coli failures across five UK water companies were analysed in this paper. The principal components of investigation costs were staff hours worked, re-samples collected, transportation, and special investigatory activities related to the sample collection location. The average investigation costs ranged from £575 for a customer tap failure to £4,775 for a water treatment works finished water failure. These costs were compared to predictions for US utilities under the Revised Total Coliform Rule. Improved understanding of the financial and staffing implications of investigating bacteriological failures can be used to budget operational expenditures and justify increased funding for preventive strategies

Chemical determinants of occupational hypersensitivity pneumonitis

Background: Workplace inhalational exposures to low molecular weight (LMW) chemicals cause hypersensitivity pneumonitis (HP) as well as the more common manifestation of respiratory hypersensitivity, occupational asthma (OA). Aims: To explore whether chemical causation of HP is associated with different structural and physico-chemical determinants from OA. Methods: Chemical causes of human cases of HP and OA were identified from searches of peer-reviewed literature up to the end of 2011. Each chemical was categorised according to whether or not it had been the attributed cause of at least one case of HP. The predicted asthma hazard was determined for each chemical using a previously developed quantitative structure-activity relationship (QSAR) model. The chemicals in both sets were independently and ‘blindly’ analysed by an expert in mechanistic chemistry for a qualitative prediction of protein cross-linking potential and determination of lipophilicity (log Kow). Results: Ten HP causing chemicals were identified and had a higher median QSAR predicted asthma hazard than the control group of 101 OA causing chemicals (p < 0.005). Nine of ten HP causing chemicals were predicted to be protein cross-linkers compared to 24/92 controls (p<0.0001). The distributions of log Kow indicated higher values for the HP list (median 3.47) compared to controls (median 0.81) (p < 0.05). Conclusion: These findings suggest that chemicals capable of causing HP tend to have higher predicted asthma hazard, are more lipophilic and are more likely to be protein cross-linkers than those causing OA. Key words: hypersensitivity pneumonitis, occupational chemicals, occupational respiratory disease, toxic inhalatio

Using Wind To Power a Groundwater Circulation Well—Preliminary Results

In areas of the country where the U.S. Department of Energy has classified the available wind resources as Class 3 or greater, the use of wind turbines to provide power to relatively small remediation systems such as groundwater circulation wells may be technically and economically feasible. Groundwater circulation wells are a good candidate technology to couple with renewable energy, because the remediation system removes contamination from the subject aquifer with no net loss of the groundwater resource, while the wind turbine does not create potentially harmful air emissions. Wind data collected in the vicinity of the former Nebraska Ordnance Plant Superfund site were used to select a wind turbine system to provide a portion of the energy necessary to power a groundwater circulation well located in an area of high trichloroethylene groundwater contamination. Because utility power was already installed at the remediation system, a 10 kW grid inter-tie wind turbine system supplements the utility system without requiring batteries for energy storage. The historical data from the site indicate that the quantity of energy purchased correlates poorly with the quantity of groundwater treated. Preliminary data from the wind turbine system indicate that the wind turbine provides more energy than the remediation system treatment components and the well submersible pump require on a monthly average. The preliminary results indicate that the coupling of wind turbines and groundwater circulation wells may be an attractive alternative in terms of the system operation time, cost savings, and contaminant mass removal

Life cycle assessment of biosolids land application and evaluation of the factors impacting human toxicity through plants uptake

Due to the increasing environmental concerns in the wastewater treatment sector, the environmental impacts of organic waste disposal procedures require careful evaluation. However, the impacts related to the return of organic matter to agricultural soils are difficult to assess. The aim of this study is to assess the environmental impacts of land application of two types of biosolids (dried and composted, respectively) from the same wastewater treatment plant in France, and to improve the quantification of human toxicity. A Life Cycle Assessment (LCA) was carried out on a case study based on validated data from an actual wastewater treatment plant. Numerous impacts were included in this analysis, but a particular emphasis was laid on human toxicity via plant ingestion. For six out of the height impact categories included in the analysis, the dried biosolids system was more harmful to the environment than the composting route, especially regarding the consumption of primary energy. Only human toxicity via water, soil and air compartments and ozone depletion impacts were higher with the composted biosolids

The public health benefits of insulation retrofits in existing housing in the United States

BACKGROUND: Methodological limitations make it difficult to quantify the public health benefits of energy efficiency programs. To address this issue, we developed a risk-based model to estimate the health benefits associated with marginal energy usage reductions and applied the model to a hypothetical case study of insulation retrofits in single-family homes in the United States. METHODS: We modeled energy savings with a regression model that extrapolated findings from an energy simulation program. Reductions of fine particulate matter (PM(2.5)) emissions and particle precursors (SO(2 )and NOx) were quantified using fuel-specific emission factors and marginal electricity analyses. Estimates of population exposure per unit emissions, varying by location and source type, were extrapolated from past dispersion model runs. Concentration-response functions for morbidity and mortality from PM(2.5 )were derived from the epidemiological literature, and economic values were assigned to health outcomes based on willingness to pay studies. RESULTS: In total, the insulation retrofits would save 800 TBTU (8 × 10(14 )British Thermal Units) per year across 46 million homes, resulting in 3,100 fewer tons of PM(2.5), 100,000 fewer tons of NOx, and 190,000 fewer tons of SO(2 )per year. These emission reductions are associated with outcomes including 240 fewer deaths, 6,500 fewer asthma attacks, and 110,000 fewer restricted activity days per year. At a state level, the health benefits per unit energy savings vary by an order of magnitude, illustrating that multiple factors (including population patterns and energy sources) influence health benefit estimates. The health benefits correspond to $1.3 billion per year in externalities averted, compared with$5.9 billion per year in economic savings. CONCLUSION: In spite of significant uncertainties related to the interpretation of PM(2.5 )health effects and other dimensions of the model, our analysis demonstrates that a risk-based methodology is viable for national-level energy efficiency programs

Haloalkane hydrolysis by Rhodococcus erythropolis cells: Comparison of conventional aqueous phase dehalogenation and nonconventional gas phase dehalogenation

Biofiltration of air polluted by volatile organic compounds is now recognized by the industrial and research communities as an effective and viable alternative to standard environmental technologies. Whereas many studies have focused on solid/liquid/gas biofilters, there have been fewer reports on waste air treatment using other biological processes, especially in a solid/gas biofilter. In this study, a comparison was made of the hydrolysis of halogenated compounds (such as 1-chlorobutane) by lyophilized Rhodococcus erythropolis cells in a novel solid/ gas biofilter and in the aqueous phase. We first determined the culture conditions for the production of R. erythropolis cells with a strong dehalogenase activity. Four different media were studied and the amount of 1-chlorobutane was optimized. Next, we report the possibility to use R. erythropolis cells in a solid/gas biofilter in order to transform halogenated compounds in corresponding alcohols. The effect of experimental parameters (total flow into the biofilter, thermodynamic activity of the substrates, temperature, carbon chain length of halogenated substrates) on the activity and stability of lyophilized cells in the gas phase was determined. A critical water thermodynamic activity (aw) of 0.4 is necessary for the enzyme to become active and optimal dehalogenase activity for the lyophilized cells is obtained for an aw of 0.9. A temperature of reaction of 40jC represents the best compromise between stability and activity. Activation energy of the reaction was determined and found equal to 59.5 KJ/mol. The pH effect on the dehalogenase activity of R. erythropolis cells was also studied in the gas phase and in the aqueous phase. It was observed that pH 9.0 provided the best activity in both systems. We observed that in the aqueous phase R. erythropolis cells were less sensitive to the variation in pH than R. erythropolis cells in the gas phase. Finally, the addition of volatile Lewis base (triethylamine) in the gaseous phase and the action of the lysozyme in order to permeabilize the cells was found to be highly beneficial to the effectiveness of the biofilter

Between-airport heterogeneity in air toxics emissions associated with individual cancer risk thresholds and population risks

Abstract Background Airports represent a complex source type of increasing importance contributing to air toxics risks. Comprehensive atmospheric dispersion models are beyond the scope of many applications, so it would be valuable to rapidly but accurately characterize the risk-relevant exposure implications of emissions at an airport. Methods In this study, we apply a high resolution atmospheric dispersion model (AERMOD) to 32 airports across the United States, focusing on benzene, 1,3-butadiene, and benzo [a]pyrene. We estimate the emission rates required at these airports to exceed a 10-6 lifetime cancer risk for the maximally exposed individual (emission thresholds) and estimate the total population risk at these emission rates. Results The emission thresholds vary by two orders of magnitude across airports, with variability predicted by proximity of populations to the airport and mixing height (R2 = 0.74–0.75 across pollutants). At these emission thresholds, the population risk within 50 km of the airport varies by two orders of magnitude across airports, driven by substantial heterogeneity in total population exposure per unit emissions that is related to population density and uncorrelated with emission thresholds. Conclusion Our findings indicate that site characteristics can be used to accurately predict maximum individual risk and total population risk at a given level of emissions, but that optimizing on one endpoint will be non-optimal for the other.</p